Tools for Husqvarna 4 speed models
'63-'71
1.Mounting Stand for engine
2. Puller for flwheel(there is no suitable substitute
for this tool.)
3. Counterhold for flywheel
4. Drift (fork seals)
5. Drift
6. Puller for clutch
7. Holding spanner for damping spindle
8. Holder for clutch
9. Ball bearing puller
10. additional size for ball bearing puller
11. Removing tool for crankcase
12. Puller for drive sprocket
13. Sprocket holder
14. -17. Reassembly tool for crankcase
These tools were for purchase and still may be at your local Husky dealer. There is also a possibility in viewing these that you may be able to duplicate the function of these tools.
Tools for Husqvarna Motocross 250cc and 400cc (1969
MG series)that were included with the purchase of the bike as well as an
owners manual. These tools were the standard issue for all
Husqvarna from '68 thru '71, possibly earlier:
1. Tool case
2. Counterhold for magneto
3. Puller for Magneto
4. Holding tool for drive sprocket
5. Puller for chain drive sprocket and primary gear
6. Combination key
7. Spark plug Bosch W260T2
8. Holder for spark plug (grey plastic two piece snap apart)
9. Chain sprockets
10. Plastic cover (bag)
11. Lockwashers
12. Lockwashers clutch
This section is under construction..................(12/27/96)
please e-mail me your comments at husky@intrepid.net
Happy Huskys
Craig