Gunnar gasser throttles for Husqvarna

Gunnar Gasser
Throttles
The correct, factory issue throttle for all Husqvarna 1978 and on

Gunnar Gasser throttles Made in Sweden for Husqvarna.
Fits all competition motorcycles! Maico, CZ, Bultaco, Penton, CanAm and more
Allows cable to run close and snug to handlebar.
Eliminates kinked and snagged cables due to crashes and branches.
Uses a shorter cable with less bends and gives easier , smoother pick up action.
Designed and developed by Gunnar Lindström.
"Whirlpull" , quick turn Throttle.

Husqvarna Gunnar Gasser Throttle # 15 15 325-01 - $22+$7ship
This Gunnar Gasser is the exact correct throttle for all Husqvarna 1978 thru 1988 possibly beyond.
125, 175, 240, 250, 390, 400, 420, 430, 500, 510, all models used this exact throttle!
This throttle replaces perfectly #15 15 278-01 (earlier model Gunnar, no longer produced) and is the correct Husqvarna throttle.

Cables for Gunnar Gassers
Picture shows Gunnar Gasser with silver cable GGC101 installed on a 1/36/114 Bing model 54 ready for installation on a 76 250 WR. This throttle and cable as shown will fit all Bing and Mikuni equipped motorcycles. The throttle shows a Magura "Pro Grip" installed. Check the Magura page for these! These cables are made in Sweden for Gunnar Gasser applications.

GGC-101 Cable for 36mm Bing 54 70-78, silver, 38" cable housing -$20 ($18 w/gasser)
GGC-102 Cable for 38 mm Mikuni 78-88, silver - 38" cable housing -$20 ($18 w/gasser)
GGC-103 Cable for 38 mm Mikuni 78-88, black - 38" cable housing - $18 ($15 with gasser)
GGC-104 Cable for 32-34 mm Bing or Mikuni 73-81 black, 38" cable housing - $18 ($15with gasser) - this cable would work for early side float 32mm Bings as well, era '66-'70.
no addtional shipping for adding cable to Gunnar Gasser.
shipping for cable alone is $5

Payment instructions - Mail money order or check to:
Craig Comontofski
1501 West King Street
Martinsburg, WV 25401-2001

I take Visa or Mastercard - e-mail me for instructions
If you are an HMC (Husqvarna Motorcycle Club) member, I will take a personal check and ship asap.
If you are not a member, and don't mind waiting 10 days, I will take a personal check as well.
Do not compound your shipping charges! E-mail me for correct amount!
husky@intrepid.net

Cast aluminum housing.
MADE IN SWEDEN on housing just as original.
black rubber cable boot included.
hi strength plastic throttle tube.
threaded adjustable cable fitting.

Magura/Gunnar throttle boot - 3 boots for $9
shipping $5 for any or all parts
I have no other parts - do not write and ask if i do please

Additional Info -
the Magura throttle boot works perfectly on this Gunnar Gasser
the Magura Pro Grips work great and look correct period

Question - Can I use this Gunnar Gasser on my 1974 250 Mag? or my 1970 400 cross? or my 76 125CR? or my 85 400WRX?
Answer -YES! This Gunnar Gasser bolts right on , the Gunnar cable hooks right up at the correct length for all Husqvarna using a Bing 54 (36mm) , Bing 84 (32mm)or Mikuni (38mm-40mm). The throttle and carburator have adjustments as well to make sure it is a perfect fit. So this throttle/cable combo bolts right on to any Husqvarna 1970 thru 1988. Probably fits early side float Bings as well.
Question - Is this the real original Gunnar Gasser?
Answer - YES! This is the real Gunnar Gasser as designed and produced by Gunnar Lindström in Sweden. This throttle is most likely one of the most important milestone designs for competition motorcycles to come along in the past 30 years. Every single motorcycle manuafacture has copied this throttle and today uses the design exclusively on their competition bikes.
Question - If I buy 2 Gunnar Gassers, can i get a discount?
Answer - YES! The second and more Gunnars would cost $20. The shipping cost would add $1 per each extra throttle.
Question - You show parts for early Gunnars, do you sell pieces for this model?
Answer - No, sorry, not at this time, i just located some early parts. I am offering these Gunnars at such a low price that shopping or supplying pieces may not make sense for me.
Question - You talk about an early Gunnar and the current Gunnar model, can you explain?
Answer - Yes, the current model I offer is the second generation, there was one earlier model. This earlier model is identified by the round, aluminum disc used as the pulley cover. The early throttle is also marked MADE IN SWEDEN,so don't confuse with the many copy cats made since. This exact current model has been in use since late '79 and replaced the earlier version.
The improvements were quick cable change and fewer pieces.
Question - Can I use this Gunnar Gasser on my Maico, Bultaco, CanAm, Greeves, Honda, Suzuki, Kawasaki, Yamaha, CZ, DKW, Sachs, Rokon, BSA, AJS, White, Carabella, Penton, Triumph, Norton, ESO, Jawa, Montesa, Harley, Hodaka, Laverda, Ariel, Indian, Hercules, Monark, Bennelli, Zundapp, Matchless, Velocette, Royal Enfield, Ducati, Frances Barnett, Cotton, Metisse, DOT, Puch, BMW, Gilera, Moto-Guzzi, Apprilla, Parilla, KTM, Husaberg, Horex, Rickman, MV Augusta, Bridgestone or whatever?
Answer -YES! This Gunnar Gasser bolts right on.