magura logoMagura Controls - Husqvarna, Maico, BMW and others

credit cards Kill Buttons, Handgrips, Lever covers


click pic for large viewclick pic for largeNEW!!!! Exactly correct Magura lever covers for 1966-1975, correct silk screened logos top and bottom , correct size snaps, correctly cut vinyl, this is a SET left and right !!!! just like OEM , please order Number- M315640 - $30pair ($24hmc) + $7 ship. These are not just close , THEY ARE PERFECT !  Fabricated in Europe to exacting Magura standards. These will be available to ship after 6/12/02. if you pay by check or mo the ship is $5. only one ship charge for 1-20 sets, these are light. Do not assume these will stay available from here on out. They available now. If you will ever restore a Husky, Maico, DKW, Sachs, Monark, ..........you had better put a pair of these in your inventory. click the pics for large views.
Magura kill button - oem HusqvarnaBrand new Husqvarna Kill Button !!! 15 17 281-01 for all Husqvarna 1966 thru 1988 and beyond. This is the correct factory kill button that was isssued on all Husqvarna models from 1970's and on but should be fitted to all models prior as a correct update. A waterproof design, uses a single wire down to the ignition system to ground out spark and prevent improper shutdown. If you value your bike, you will have one of these properly fitted to prevent runaway  throttle from seizing the piston. This also allows proper idle setting and tuning of low end on early Huskys.
15 17 281-01 - Husky Kill button - $12+$5ship ($10hmc)

Magura small grip set - Husky 66-72Magura grip set - Husqvarna 66-72
The exact correct Magura grip set (pair)consisting of right throttle grip and left handlebar grip - $20+$6 ship . These grips have the "MAGURA" script top and bottom as original. Both also have "Made in W GERMANY" in tiny letters circumferentially at the closed end. If you are doing a restoration these are the ones to purchase. Maybe a spare set for show.  Shipping is by Priority US Mail in a box. These grips are also correct on Maico 1950's thru early 70's and other Magura equipped bikes
12 13 215/805-01 - right and left grip set , you must specify plastic or steel throttle tube
(as the throttle grips are different diameter)- $20 +$6ship

Pro-Grips pairGrip set left/right for Husqvarna 1979-89 - Magura Pro grip - $18 +$6 ship ($15 HMC)
These are the Magura grips you would want to use on a vintage bike if you are wanting a softer, grippier grip. The Magura Pro Grips fit all year Husqvarna controls. There are safety wire grooves if you feel you need them.  available in red if needed, same price.

314Magura 314 throttle
Gunnar gassar style, black polycarbonate - $25+$6 ship ($20 HMC), comes without grip (picture shows Pro grip).
Application is for all Husqvarna but visually correct on 1979 thru 89 and later. This throttle has 2 ranges of twist and they can be switched in 1 minute with a phillips screwdriver to pop the top. One range is very quick and would be used for Motocross, the other is moderate rate and would be good for enduro. Total stroke is 48mm at 103 degrees or at  91 degrees.
small bellows boot Magura Boot for 250/360 RT throttle 73-75, early 125 throttles 72-74, also fits 304 throttle 66-71. Can also be used for other applications ISDT cable adj boot, brake switch, etc -
19mm ID x 5mm outlet x 44mm length  - Order Number -  M405660 - $8 + shipping

www.huskyclub.com